MX-Sensors (433MHz), the programmable universal sensors, are both smart and efficient specially built for sensor replacement to perform like OE sensors, in terms of signal interval, durability and functionality supporting up to 99% of the US and Canadian vehicles. The 2-SKU sensor solution that covers over 98% of all OE sensors on the market will greatly simplify your inventory management and lower investment and sales loss.
1.Built to perform like OE sensor, in terms of signal, durability and functionality
2.Automotive battery grade to meet severe weather conditions
3.High-precision air valve to prevent air leakage
4.Replaceable aluminum valve stem is anodized for corrosion resistance
5.Robust clamp-in pivoting stem design allows for 0-35 degree angle adjustment to fit all types of wheels
6.Fast and simple assembly onto any wheels
-40C to +125C
-40 C to +150C
Pressure Monitoring Range
0 to 900kpa
Pressure Reading Accuracy
Temperature Reading Accuracy
G Sensor Reading Accuracy
Dimensions (W x H x D)
52*29.1*22.2mM( 11388mmâ3; )
1.Loose the tire: Remove the valve cap and core and deflate the tire.
2.Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3.Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4.Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5.Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
1.The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS.
2.Make sure to program the sensor by AUTEL sensor programming tools for your specific vehicle make, model and year before installation.
3.Do not install programmed TPMS sensor in damaged wheels.
4.In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Autel.
5.Upon completion of installation, test the vehicle TPMS systems using procedures described in the original manufacturer's user guide to confirm proper installation.
6.Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged.
1pc x MX-Sensor 433MHz Universal Programmable TPMS Sensor