Let us check the key fob of 2009 Porsche Boxter: 3 buttons straight blade key, ID46 chip inside, remote frequency 433MHz, other car also use this key fob: 911, Cayman.
Many locksmith have Porsche special tester PIWIS which can program Porsche Boxster, but the program procedure requires 3 codes and they don’t know how to use tool to obtain 3 codes – teach enable code (key learning code), transponder secret key, transponder password. Generally only Porsche dealer has above codes by search VIN, this post we will share how to use device to obtain these codes and how to program key with these codes.
What tool can read Porsche 3 codes - teach enable code (key learning code), transponder secret key, transponder password?
How to read 3 codes?
Use key Copier to decrypt “ working key ID46 chip” on a working key to obtain codes like below photo: red rectangle 943409 is teach enable code, yellow rectangle 245587 is transponder password, blue rectangle 029434096304 is transponder secret key.
What device to program Porsche Boxster key?
Porsche tester software PIWIS or Lonsdor K518.
How to program key with device? Programming Steps?
Here is two examples with PIWIS and Lonsdor K518.
Example 1: program key with PIWIS
Step 1: Connect PIWIS tester with car via OBD port, start PIWIS software, insert original key to ignition and turn to on position, power UP PIWIS device, go to: Diagnostics > Boxster/Cayman > 987, will build communication connection with car.
Step 2: After connection, go to: PAS > maintenance / repair > set key.
Step 3: Enter the key number need to be programmed, enter teach enable code (key learning code), transponder secret key, and transponder password read by key copier, will start to verify codes.
Step 4: Verify complete, the system will require to insert the key to ignition and switch on position, the dashboard will show the key number.
Step 5: insert the old key and turn to ON, the dash will show 1-2 after key programmed, remove the key, insert new key and turn on, dash displays 2-2, key programmed.
Step 6: Start the car with last key and press any button of key fob for 5 seconds, the key fob will works.
Example 2: program key with Lonsdor K518
Step 1: Connect K518 with car via OBD port, insert original working key to ignition and turn to on position. Power UP K518, go to: Porsche > Boxster > program key
Step 2: Enter the key number need to be programmed, first time enter teach enable code (key learning code), second time enter transponder password, last time enter transponder secret key read by key copier, then start to verify codes.
Step 3-4 do as same as example 1.
DISCLAIMER: The technology and software in the blog are only used for technical research and auto repair, and are not allowed to be used for illegal purposes, We will not be responsable for any direct and indirect damages from the use of the file created by this page.